Tetra®

EVERLAST METALS: Tetra®
Metal Wall & Soffit Panel Profile


The Everlast Metals Tetra® is a concealed fastened metal wall panel, with unique angles and rib patterns which can be combined to create an individualized style. Can be installed in a vertical or horizontal wall application. Ideal for fascia and equipment screen applications as well.

The panel is available in a wide variety of materials and finishes. Substrates include G-90 Galvanized Steel, Galvalume® steel, and Aluminum. All painted products are Fluropon® coated.


METHOD OF APPLICATION:

Everlast Metals Tetra® panels must be installed in a sequential pattern. Application of an Everlast Metals approved underlayment prior to panel installation is recommended when installed over a solid substrate.


Storage:

Everlast Metals metal panels should be stored in a well-ventilated, dry place where no moisture can contact them. Moisture (from rain, snow, condensation, etc.) trapped between layers of material may cause water stains or white rust, which can affect the service life of the material and will detract from its appearance. If outdoor storage cannot be avoided, protect the panels with a ventilated canvas or waterproof paper cover. Do not use plastic, which can cause condensation. Keep the material off the ground in an inclined position with an insulator such as wood. Protective film may degrade or become brittle with long-term exposure to direct sunlight.


Panel Size:

Panel widths 16”
Seam Height: 0.875”
Minimum length of 2’
Maximum length 40’


PAINT Warranties:

Fluropon® Warranty

SUBSTRATE Warranties:

AZ55 Warranty Aluminum Warranty
Energy Star
Green Building
Product MasterSpec
ARCAT